湛江发电厂一号机振动的原因分析及处理

对湛江发电厂1号机4号轴瓦振动大的问题进行分析,认为其主要原因为:低压缸变形大导致动静碰摩,轴承座及盘车箱下部脱空引起刚度降低,轴承座的固有频率与工频相近等。对此,采取了相应的处理措施,实施后4号轴瓦振动得到有效解决。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

Thermodynamic analysis of solar photovoltaic cell systems

The thermodynamic characteristics of solar photovoltaic (PV) cells are investigated from a perspective based on exergy. A new efficiency is developed that is useful in studying PV performance and possible improvements. Exergy analysis is applied to a PV system and its components, and exergy flows, losses and efficiencies are evaluated. Energy efficiency is seen to vary between 7% and 12% during the day. In contrast, exergy efficiencies, which incorporate the second law of thermodynamics and account for solar irradiation exergy values, are lower for electricity generation using the considered PV system, ranging from 2% to 8%. Values of “fill factors” are determined for the system and observed to be similar to values of exergy efficiency.     

装载机多路阀操纵系统改进设计

论述了装载机现行的操纵机构,分析了液压先导操纵阀的应用局限性。介绍了气动助力器的工作原理,通过对操纵杆上的期望力分析计算获得满足性能要求的操纵力。装载机操纵机构借助助力器的助力作用,可以用较小的操纵力对装载机进行轻松操纵,从而使操作轻便灵活。     

船艇电站仿真与综合管理系统

论文介绍了船艇电站模拟器的组成和实时仿真功能,着重描述了多层次的图形管理系统及其仿真界面。课题将多媒体课件制作与模拟器有机地结合,涵盖了船舶主要电气设备的控制电路,既利于实践训练又便于原理的讲解,并在实践中取得了良好的效果。     

大面积流气式多丝正比计数管的空间电场强度分布及参数选择

为了解大面积流气式多丝正比计数管工作空间的电场分布，本文提出了近似计算的物理模型，并在设定的条件下进行了数值计算，得到了电场分布的近似结果及其某些参数，诸如丝距和电极间距等的关系，以便于多丝正比计数管的正确设计和使用。     

小型全内腔脉冲Ar~＋激光管的研制

介绍一种小型全内腔脉冲Ａｒ＋激光管的设计和结构。并对不同阴极，放电管直径，激励电压及Ａｒ气压等对输出功率及激光管寿命的影响作了一系列的实验，试制出结构简单，使用方便，价格便宜的有一定实用价值的小型全内脏脉冲Ａｒ＋激光管。     

掺杂对低压ZnO压敏陶瓷材料显微结构及性能的影响

本文探讨了多种金属氧化物对ＺｎＯ－Ｂｉ＿２Ｏ＿３－ＴｉＯ＿２系材料的改性作用和对其微结构的影响，为得到预定性能的材料提供了掺杂方面的实验依据。     

利用液晶光阀实现的光学形态变换

提出了基于液晶光阀的光学二值图像领域处理器，利用它完成了扩、蚀和边缘检测等形态变换操作，并给出了实验结果。     

延长分米波电视发射管使用寿命的探讨（上）

文章从原理上讨论了影响分米波电视发射管寿命的若干因素。并提出了若干延长寿命的建议：（１）正确的灯丝加热方法是行之有效的措施，经验证明：过分强调降低灯丝电压往往得到相反的效果。（２）必须有良好的冷却方式。（３）通过对帘栅电路的分析，说明对此电路必须作很好的处理以消除故障和防止寄生振荡。